29-inch tyres and wheels, with a cross-section ranging from 1.70 to 2.20." />

29x1.7/2.2 Schrader Valve Inner Tube

8311106

B'TWIN

Write the first review
29" diameter tyres, with a cross-section ranging from 1.70 to 2.20 with a 48 mm Schrader valve.
29-inch tyres and wheels, with a cross-section ranging from 1.70 to 2.20.
دليل المقاسات

المنتج غير متوفر

Buy
     In-Store

جميع محلات ديكاتلون

المزايا
Compatibility29-inch tyres and wheels, with a cross-section ranging from 1.70 to 2.20.
WaterproofVery high quality, 48mm Schrader (car) valve that retains air pressure.
الضمان2 السنوات
معلومات تقنية

1
How to choose your inner tube
Check the information indicated on the sidewall of the tyre (diameter and width). For example, 27.5 x 1.90 means a tyre with a 27.5-inch diameter that is 1.90 inches wide. On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example, 50-584 means your tyre is 50 mm wide with an inner diameter of 584 mm (approx. 26x1.90).
2
Removing an inner tube
Remove the used inner tube using B'Twin tyre levers (item code 8047839).
3
Checks to carry out before installing an inner tube
Check the condition of your tyre and replace it if necessary. Make sure no objects are lodged in the tyre. Check the condition of your tyre rim strip. A rim strip that is even slightly bent can cause punctures. Check that your rim does not have any other issues that could damage your inner tube
4
Mounting the inner tube
Pre-inflate the inner tube slightly to avoid pinching. Insert the valve, making sure you are using the correct valve for your rim. Put the inner tube entirely inside the tyre so that it fits inside the rim. Take care not to pinch the inner tube when fitting.
5
Mounting the tyre
Start by mounting the tyre onto the wheel on the opposite side to the valve. Finish mounting the tyre at the valve to avoid pinching the inner tube. Never mount your tyre with a screwdriver or a tyre lever, as you risk pinching and puncturing the inner tube.
6
Inflating the tyre
Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI). Regularly check that your tyre is in the correct position as you inflate it.
7
Tip from the pros
To avoid punctures from pinching and for best tyre performance, we recommend that you check your tyres and inflate them to the suggested pressure before every ride.
8
Weight:
250 g
معلومات/ مبدأ عام/ تقنية
التركيب
Membrane : 100.0% Rubber - Synthetic

اختبار المنتج
To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.

نصيحة التخزين
Carry your inner tubes in a container to protect them from punctures (tool drum, original packaging, or bag).
    Show results for