Pierce with a screwdriver from bottom to top without detaching the slick.
Ease of use
Plug screwable 10-15cm from the front. Do not attach close to the stringers.
Where to install the leash plug on the bodyboard?
To install the plug on your bodyboard, first identify the right spot: 10 to 15 cm from the nose and far enough away from the (potential) stringers.
If the board has 2 stringers, the plug must be centred. If the board has only one stringer, the plug must be at least 5cm away relative to the centre of the board, and more to the right if you wear a leash on the right, or vice versa.
How to install the leash plug?
At the desired location, pierce a hole using a large Phillips screwdriver from below. (If you pierce from the top, you could damage the slick by lifting it off).
Insert the 2 parts of the plug one after the other, with the screw at the bottom.
Screw it in using a £2 coin until the slick warps slightly.