SWIMMING GOGGLES 100 XBASE SIZE L BLACK

UNISEX ALL AGES

SWIMMING

2 سنوات

The appearance of fog depends on several factors, the difference in temperature between the body and the water, humidity levels, etc. Wear due to friction is one of the main causes. If your goggles fog up, dip your lenses in the water and a protective film will reform. After a certain amount of time it is normal for the performance of the anti-fog coating to be diminished. We offer an anti-fog marker that reactivates an ageing anti-fog treatment and makes your goggles last longer.

Swimming goggle watertightness depends on correctly adjusting the silicone seals to the face shape. Before purchase, we advise you to do the "suction" test without the strap. If the goggles stay on the face by themselves via slight suction, the product will be watertight during your swim. This also enables you to spot any areas of discomfort or annoyance when the model is on the face. This model comes in size S (narrow faces) and size L

We recommend: - rinsing your goggles (only if necessary) by simply dipping them in water - avoiding directing powerful jets of water at the inner surface of the lenses. - storing the goggles in their case after each session to prevent damage to the lenses (on the inner surface as there is an anti-fog coating and on the outer surface to prevent scratches) - not exposing them to temperatures of over 60°C DO NOT TOUCH/RUB THE INSIDE OF YOUR LENSES

Complies with standard: Q/BT 4734 - 2014, all the Nabaiji swimming goggles protect against harmful UVA and UVB rays when used normally, regardless of the lens tint. Looking directly at the sun is dangerous and can lead to irreversible eye damage.

After use, store the swimming goggles in their case or plastic pouch. Important: Do not touch the inner surface of the lenses as this could destroy the anti-fog treatment

The Nabaiji swimming goggles comply with the EPI regulation 2016/425. Our products are tested and approved by independent laboratories. Goggles intended for swimming at the surface

Joint/Gasket : 100.0% Silicon Lens : 100.0% Polycarbonate (PC) Buckle : 100.0% Polyurethane (PU)