Made for regular yacht racers sailing in rainy weather. This waterproof sailing anorak is ideal for manoeuvring on board and staying dry. Its technology keeps the sailor protected from the elements so they can concentrate on sailing on any kind of boat!
Waterproof4hr in the rain (>8000 mm, 450L/m²/h). Fully taped seams. Water repellent.
Dual-layer hydrophilic fabric >8,000 mm of water pressure when new. Fully taped seams. Two-way adjustable hood. Sleeve cuffs adjustable by rip-tab strips. Central opening features a flap with a drainage channel for optimal waterproofing. Tested under a simulated heavy rain shower (450 L/hr/sqm) for 4 hours
Three-way adjustable hood. Adjustable jacket hem.
2 shoulder patches 2 hood patches to intensify light sources.
RESISTANCE TO WEAR
Injected plastic central zip resistant to salt oxidation.
HOW TO REACTIVE THE JACKET'S WATER REPELLENCY step 1: before washing
Close all zips and flaps and remove any parts of the garment that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets. Then turn the garment inside out to wash it.
HOW TO REACTIVE THE JACKET'S WATER REPELLENCY step 2: washing
You can wash your jacket on a synthetic cycle at 30° or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach. Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine. Very important: select a thorough rinse or double rinse to completely remove all detergent residue.
HOW TO REACTIVE THE JACKET'S WATER REPELLENCY step 3: drying
Drying is a crucial phase in reactivating the water repellent treatment. We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator. Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round.
HOW TO REACTIVE THE JACKET'S WATER REPELLENCY
If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you "re-waterproof" it using a spray sold in our stores.
Score to compare the environmental impact of products
The environmental impact of the product is calculated over its entire life cycle and with different indicators. An overall score (ABCDE) is attributed to help you easily identify the products with the best environmental performance by comparing products of the same type with one another (T-shirts, trousers, backpacks, etc.). Decathlon chose to apply this voluntary environmental labelling scheme. For more information, visit: http://sustainability.decathlon.com/
Store in a dry place, but do not leave your garment on a heat source such as a radiator, as this may damage the breathable membrane or coating.
Machine wash your Offshoroa waterproof anorak at 30°C. Inside-out with hook and loop strips stuck together. Choose a long rinse and gentle spin cycle. Line dry if possible. Occasional tumble drying on low for a short period of time will improve the water repellent treatment. To reactivate the water-repellent treatment, you can also iron the fabric at a maximum temperature of 140°C or apply the Tribord re-waterproofing spray.