Hide Filters
Filters 0
Sort by :
Filters 0
20" x 1.5 to 1.9 Schrader Valve Inner Tube
  • 20" x 1.5 to 1.9 Schrader Valve Inner Tube
  • 20" x 1.5 to 1.9 Schrader Valve Inner Tube
  • 20" x 1.5 to 1.9 Schrader Valve Inner Tube
  • 20" x 1.5 to 1.9 Schrader Valve Inner Tube
  • 20" x 1.5 to 1.9 Schrader Valve Inner Tube
20" x 1.5 to 1.9 Schrader Valve Inner Tube

DECATHLON

8640844

20" x 1.5 to 1.9 Schrader Valve Inner Tube

EGP149.00
Tax included
  • 20" x 1.5 to 1.9 Schrader Valve Inner Tube
  • 20" x 1.5 to 1.9 Schrader Valve Inner Tube
  • 20" x 1.5 to 1.9 Schrader Valve Inner Tube
  • 20" x 1.5 to 1.9 Schrader Valve Inner Tube
  • 20" x 1.5 to 1.9 Schrader Valve Inner Tube
20" x 1.5 to 1.9 Schrader Valve Inner Tube
Size :
No Size
Not available online

Store Availability

This inner tube is suitable for 20" diameter tyres with 1.50 to 1.90 section with a 33mm Schrader valve.

BENEFITS

Watertight

Optimised composition to ensure your inner tube has a good seal.

Versatility

20", 1.5 to 1.9 cross section tyres.
ETRTO 38/47 - 406

TECHNICAL INFORMATIONS

How to choose an inner tube

Check all the information indicated on the sidewall of the tyre (diameter and width). For example, 20 x 1.60 means your tyre is 20 inches in diameter and 1.60 inches wide.
On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example, 40-406 means a tyre that is 40 mm wide and has an inner diameter of 406 mm (or 20 x 1.60).

Removing an inner tube

Remove the old inner tube using a tyre lever.

Checks to carry out before installing an inner tube

Check the condition of your tyre and replace it if necessary.
Make sure no objects are lodged in the tyre.
Check the condition of your tyre rim strip.
A rim strip that is even slightly bent can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube.

Mounting the inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rim.
Put the inner tube entirely inside the tyre so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.

Mounting the tyre

Start mounting the tyre at the valve.
Finish mounting the tyre opposite the valve to avoid pinching the inner tube.
Never mount your tyre with a tool or a tyre lever, as you risk pinching and puncturing the inner tube.

Inflating the tyre

Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI).
Regularly check that your tyre is in the correct position as you inflate it.

Tip from the pros

To prevent any puncture from pinching and to achieve the best performance, we recommend checking and, if necessary, pumping up your front tyre before each ride.

Weight:

121 g