Hide Filters
Filters 0
Sort by :
Filters 0
26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader
  • 26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader
  • 26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader
  • 26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader
  • 26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader
  • 26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader
26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader

DECATHLON

8009080

26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader

EGP99.00
Tax included
  • 26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader
  • 26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader
  • 26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader
  • 26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader
  • 26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader
26x1.7-2.2 Self-Sealing Bike Inner Tube - Schrader
Size :
.
Not available online

Store Availability

This inner tube allows you to continue cycling when a conventional inner tube would have gone flat.

BENEFITS

Compatibility

26" Schrader valve (large valve) bike tyres. ETRTO 44/57 - 559

Puncture resistance

The liquid in the inner tube seals small punctures (< 3mm).

Waterproof

Optimised composition to ensure your inner tube has a good seal.

TECHNICAL INFORMATIONS

How to choose your inner tube

Check all the information indicated on the sidewall of the tyre (diameter and width). For example, 26 x 2.00 means your tyre is 26 inches in diameter and 2.00 inches in width.
On the sidewall, you will also find the dimensions in mm in international ETRTO measurements.
For example 50-559 means the tyre is 50 mm wide with an inner diameter of 559 mm (or 26 x 2.00).

Removing an inner tube

Remove the old inner tube using B'Twin tyre levers.

What to check before installing your new inner tube

Check the condition of your tyre and replace it if necessary.
Make sure no objects are lodged in the tyre.
Check the condition of your tyre rim strip.
A rim strip that is even slightly bent can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube.

Fitting your inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rim.
Put the inner tube entirely inside the tyre so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.

Mounting the tyre

Start by mounting the tyre onto the wheel on the opposite side to the valve.
Finish mounting the tyre at the valve to avoid pinching the inner tube.
Never mount your tyre with a screwdriver or a tyre lever, as you risk pinching and puncturing the inner tube.

Inflating the tyre

Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI).
Regularly check that your tyre is in the correct position as you inflate it.

Tip from the pros

To prevent any puncture from pinching and to achieve the best performance, we recommend checking and, if necessary, pumping up your front tyre before each ride.

Weight:

380 g