How to use
Put 3 padel balls in the cylinder and screw the cover until you reach the limit shown on the cylinder. Don't forget to put the O-ring in place to seal the air inside the product and increase the internal pressure up to 15 PSI. By filling the empty space with compressed air, you increase the internal pressure and the balls are unable to eliminate their internal air. This maintains the original pressure until the next time the balls are used.
Care instructions
1.Remove the O-ring using a blunt object so you do not damage it and clean it with a piece of paper.
2.
Clean the recess where the O-ring is placed as well as the spiral using a piece of paper.
3.Wipe the inside of the cover with a piece of paper.
4. Lubricate, but NOT OVERLY, using silicone grease. We recommend the brand Weicon.
WHY USE AN ACCESSORY FOR BALL PRESSURE RETENTION?
The rubber core in pressurised balls gradually releases the air they contain. If you leave your balls out without playing for several days, you'll notice they don't perform as well.
The KUIKMA PP500 pressuriser lets you store your balls under pressure to extend their life span.
How we design our products
This product is made in Spain and was designed by a team that's passionate about padel.
The KUIKMA innovation centre is based in Spain in the PADEL HANGAR club in Alcobendas, near Madrid.
