DECATHLON
Front disc Brakes Pads Compatible With Tektro And Novela 2010
Designed for replacing your Tektro IO, Gemini, Novela (pre-2010) and Aquila disc brake pads
semi-metal brake pads: the most versatile
ID 8350522
BENEFITS
Compatibility
For Tektro IO, Novela (before 2010), Gemini, Aquila disc brakes
Brake control
Guarantees steady braking.
Abrasion resistance
Sintered material with a high friction index. 2x longer lasting than an organic
Braking power
Effective even in water and mud.
Instructions
DownloadTECHNICAL INFORMATIONS
What tools will you need?
While carrying out this task, you may need:
A brake pad spacer, brake cleaner and a microfibre cloth.
The process of bedding-in the brake pads on a bike is essential for effective braking.
The purpose of the bedding-in process is to create an area of consistent contact between the brake pads and discs by gradually heating them up.
Before going ahead with it, clean the discs, replace them if you're installing new brake pads, and make sure you have the right equipment to hand. To be extra safe, do the bedding-in on a flat road when it's dry and free of traffic or obstacles.
Bedding-in means performing a series of braking actions in which you gradually apply the brakes at different speeds, from slow to fast:
To bed the pads in properly, apply the front and back brakes alternately, then perform a series of slow-downs: brake ten times at 15 km/h to slow down to 5 km/h, ten more to go from 20 down to 5 km/h, and the last ten at 25 km/h to go down to 5 km/h. Make sure you ventilate the disc and caliper between each series by riding along for a few metres without using the brakes.
A few extra tips for bedding-in your brake pads:
To bed-in your bike brakes properly, use one brake at a time, without sudden stops or abrupt braking.Ride on a flat road and give the system time to adjust, which can take about 30 minutes.If your rainbow traces appear on your discs or the brakes lose power, then your pads are probably glazed.. The Decathlon workshop can help you fix that.
composition
composition
Main part: 50.0% Resin, 50.0% Steel
Tips for storage and maintenance
Restrictions on use
Do not spray with oil or all-in-one products
TESTS AND WARRANTY
Test product
This model has been tested and approved in the lab
Warranty
2 Years