QUECHUA
1 Anti-shock Hiking Pole - MT500 Anti-shock Grey
We have designed this anti-shock pole for hiking and trekking enthusiasts who practice intensively on rough mountain terrain
Hike with confidence with this anti-shock pole, perfect for tackling rough mountain terrain. It's collapsible, and has a foam handle. And the shock absorber reduces the impact on joints as you walk.
ID 8379457
BENEFITS
Compact design
3 telescopic sections. Collapsed length: 64 cm. Collapsed width: ~5cm.
Compatibility
Summer basket supplied. Many accessories and service parts available separately.
Ergonomic grip
Dense foam grip, long 3D design. Comfortable knob. Soft wrist-strap
Adjustable
Inside screw adjustment system.Unlockable anti-shock system.From 105 to 130 cm.
Robustness
Aluminium 7075-T6. Tube diameter 18/16/14mm. Tungsten tip
Weight
265 g / pole
TECHNICAL INFORMATIONS
How it was designed...
This model is entirely designed and approved by our team, at the foot of Mont Blanc.
To fulfil the anti-shock promise, we have chosen this system with a spring integrated in the screw tightening system.
We then designed a handle that enables powerful and comfortable grip whatever the position: along the tube for climbs and banking terrain, with the wrist-strap for efficient pushing and on the knob for descents.
How to adjust your poles to the correct length?
Hold the poles with your arms bent at a right angle.
To do this:
- unscrew the middle section, find the length of pole you want and screw back tightly
- tighten further (a half turn) if you notice your pole is collapsing
- do the same with the lower section
Never go over the STOP line to avoid breaking the pole.
Directions for use
This hiking pole is designed to help you balance, propel yourself and distribute effort between arms and legs.
To be on the safe side, check before you set off and at regular intervals that your baton is locked in place by simulating heavy bumps. If you notice that your pole tends to collapse then tighten it further by a half turn.
Do not put on your backpack in case of a storm.
Care tips
Proper maintenance of your baton will ensure that it functions optimally and that it lasts longer.
After use, if water has penetrated the stick, remove the strands and allow to dry. If necessary, clean the dust or mud with water or a dry brush. Once dry, you can reassemble the strands.
We recommend that you do not attempt to oil or grease the mechanisms.
Why is the pole sold individually?
At Decathlon, we have decided to sell our hiking/trekking poles individually. First because of how they are used. Indeed, some people only want to use one pole. Also, if one of your poles breaks, this means you only have to buy one and not a complete pair.
Accessories sold separately and adapted to this model
The advantage of buying Forclaz trekking poles is that you have a wide choice of compatible accessories and spare parts. So you can enjoy it for as long as possible.
Hiking pole caps: ref. 8580865
Summer baskets : ref. 8737774
Winter baskets: ref. 8503857
Replacement tip: ref. 8577676 or 8755646 (if new screwable version)
composition
composition
Axis: 100.0% Aluminium; Handle: 100.0% Polyoxymethylene
Tips for storage and maintenance
Storage tips
Store the baton in a dry place without tightening the adjusting systems, so that they are not strained and retain their clamping power.
TESTS AND WARRANTY
Test product
To set our thresholds, we have measured the stresses on the poles in the most demanding situations. During its development, each model undergoes laboratory tests that reproduce these stresses (compression, three-point bending, etc.) until it breaks. We also tests parts separately (tightening power, tearing, etc). Finally, these tests are regularly repeated in production to ensure a constant level of quality.
Warranty
2 Years
Agree by
As well as these laboratory tests, Théo, our test engineer, makes sure that each model also undergoes trials on standardised test terrains. It lets us check aspects such as comfort, ease of adjustment, vibrations, etc. Finally, we also check durability with a durability test operation that can reach over 500 km.