DECATHLON
29x1.9/2.5 Self-Repairing 48 mm Presta Valve Inner Tube
This inner tube allows you to continue cycling when a conventional inner tube would have gone flat.
29" self-sealing inner tube with Presta valve.
The preventive sealant inside the inner tube instantly repairs punctures (less than 3 mm).
ID 968605
BENEFITS
Compatibility
29" Presta valve (small valve) tyres. ETRTO 47/64 - 622
Puncture resistance
The liquid in the inner tube seals small punctures (< 3mm).
Lasting air retention
Optimised composition to ensure your inner tube has a good seal.
TECHNICAL INFORMATIONS
Choosing an inner tube:
To take proper care of your bike, it's important to know the exact dimensions of your tyres.This info appears on the sidewall of the tyre (diameter and section).
For example, 29x1.90 means that the tyre is 29 inches in diameter and 1.90 inches wide.
On the tyre sidewall you will also find the dimensions in mm in ETRTO international units.
For example, 50-622 means that the tyre is 50mm wide with a 622mm internal diameter (approx. 29x1.90).
To take the inner tube out, you'll need the following tools:
It's easy to take your inner tube out using our B'TWIN tyre lever.
Checks to carry out before installing an inner tube:
For correct mounting, it's always good to check everything first: clean tyre, no fractures on the rim strip, no damage on the rim.
How to change an inner tube:
Watch our tutorial.Pump the inner tube up slightly to avoid errors.Place the valve in position, install the inner tube inside the tyre, and push it into the rim without getting the membrane stuck.
Fitting a tyre:
The right way to mount a tyre is to start with the valve and end on the opposite side, without using a tyre lever to prevent the risk of puncture.
Inflating a tyre:
Before pumping, check the pressure in PSI or bars.While you're pumping, make sure the tyre stays properly in position.
Pro advice:
To forestall the risk of puncture from pinching and to achieve the best performance, we recommend checking and, if necessary, pumping up your front tyre before each ride.
More info available on this link:
https://conseilsport.decathlon.fr/how-to-change-your-inner-tube
Weight:
430g
composition
composition
Main part: 100.0% Synthetic Rubber; Main filling: 5.0% Cellulose, 40.0% Glycerol, 55.0% Water; Valve: 100.0% Brass; Cover: 100.0% Polypropylene
Tips for storage and maintenance
Storage tips
Carry your inner tubes in a container to protect them from getting punctured (tool drum, original packaging…).
Restrictions on use
Not suitable for use on the sides of your tyres
TESTS AND WARRANTY
Test product
To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.
Warranty
2 Years