Camping Shelter with Poles - 1 person - Arpenaz 1P
Our hiking designers have designed this Arpenaz 1P shelter. For 1 adult or 2 kids wanting shelter from the sun, light wind or ground insulation.
Go and discover with this small shelter to protect you from the sun (UPF 50+). Compact, you can take it everywhere even in your backpack. Its pole structure is easy to pitch.
BENEFITS
Water repellent
Protects from light rain | Note: Non-taped seams.
Easy transport
Compact once folder, case dimensions in cm: 37 x Ø10 I Lightweight 1 kg.
Ease of use
Easily set up: 2 poles | Freestanding: may be easily moved once set up
Capacity
Shelters 1 adult or 2 kids I Width 170cm I Depth 150cm I Height 110cm
Sun protection
Sun protection, UPF 50+ (laboratory tested).
Wind resistance
Withstands winds of around 30 km/hr (force 4) | Wind tunnel test.
TECHNICAL INFORMATIONS
Sun protection
Our main fabric is made from 75D (Denier) polyester fibres, coated in polyurethane to guarantee UPF 50+ sun protection.
Caution: Since some UV rays pass directly or indirectly through the front of the tent, we advise you to protect your skin.
Pitching and dismantling
Shelter with traditional pole structure.
- Read the pitching and dismantling instructions, video available on the Decathlon website,
- Take all the parts out of the case,
- Spread out the poles on the ground and the textile cover,
- Insert the front pole in the fabric sleeve up to the end, make it taut and insert it in the opposite sleeve,
- Repeat this for the second pole,
- The shelter is free-standing, move it and plant the 3 pegs.
Dimensions
The unfolded shelter forms a 1 sqm triangle on the ground.
See dimensions above.
Wind resistance
We test all our tents in a wind tunnel on a turntable. The goal is to expose each side of the shelter to the same wind intensity.
Properly pitched, this shelter remains habitable in wind speed 4, measured at 30 km/hr.
rain protection
This shelter protects you from light rain thanks to the polyurethane-coated polyester fabric. The groundsheet protects you from damp and water run-off.
Warning! The seams are not sealed, which means it does not provide protection against heavy rain.
Don't throw away, repair !
This tent is designed to be repairable. Spare parts and repairs are available at the workshop at your local Decathlon shop or on Decathlon.fr.
Here are the reference numbers for the spare parts:
- Fibreglass pole Ø 7.9 mm and 60 cm long cut to size: 8361597,
- Ferrule for pole Ø 7.9 mm: 8302916,
- Elastic Ø 2.5 mm - 6 m long: 1163607,
- Fabric adhesive patch kit - blue: 8584596,
- Fabric repair adhesive roll - blue: 8584597.
Care and storage advice
Our shelters have been designed for occasional outdoor use (4 weeks per year) during your adventures in the great outdoors. Continued exposure to UV rays over several weeks can damage the fabric. These products are not classified as “garden furniture” and aren’t designed to be left outdoors permanently. To guarantee maximum of your shelter, it's important to clean it and to store it in its cover when not in use.
composition
composition
Main fabric: 100.0% Polyester; Floor mat: 100.0% Polyethylene; Pole: 100.0% Glass Fiber; Carry bag: 100.0% Polyester
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry your shelter thoroughly before storing, including underneath. This will prevent any odours or mould from forming.
Restrictions on use
Not suitable for permanent outdoor exposure.
TESTS AND WARRANTY
Test product
This product was approved following a wide variety of laboratory and field tests, by our users.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested outdoors in conditions that you will come across during your adventures. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
Product made from 15% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
ProcessBiton
Product made from 85% yarn combining dyed and undyed fibres
Using this dyeing process enables us to reduce the CO2 emissions linked to the production of the dyed component by at least 39% compared to conventional dyeing.