29x1.7-2.2 Bike Inner Tube - Presta
Store Availability
This inner tube is suitable for 29" diameter tyres of 1.70 to 2.20 section with a 48mm Presta valve.
Presta valve inner tube for 29" tyres with a 1.70 to 2.20 cross-section.
BENEFITS
Compatibility
29-inch diameter tyres, 1.70 to 2.20 cross-section. ETRTO 44/57 - 622
Waterproof
Optimised composition to ensure your inner tube has a good seal.
Instructions
DownloadTECHNICAL INFORMATIONS
How to choose your inner tube
Check all the information indicated on the sidewall of the tyre (diameter and width). For example, 29x1.90 means that the tyre is 29 inches in diameter and 1.90 inches wide.
On the tyre sidewall you will also find the dimensions in mm in ETRTO international units.
For example, 50-622 means that the tyre is 50mm wide with a 622mm internal diameter (approx. 29x2.00).
Removing an inner tube
Remove the old inner tube using B'Twin tyre levers
Checks to carry out before installing an inner tube
Check the condition of your tyre and replace it if necessary.
Make sure no objects are lodged in the tyre.
Check the condition of your rim strip and that it is positioned correctly.
A rim strip that is even slightly bent can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube
Mounting the inner tube
Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rim.
Put the inner tube entirely inside the tyre so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.
Mounting the tyre
Start mounting the tyre at the valve.
Finish mounting the tyre opposite the valve to avoid pinching the inner tube.
Never mount your tyre with a tool or a tyre lever, as you risk pinching and puncturing the inner tube.
Inflating the tyre
Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI).
Regularly check that your tyre is in the correct position as you inflate it.
Tip from the pros
To avoid punctures from pinching and for the best tyre performance, we recommend that you check your tyres and inflate them to the suggested pressure before every ride.
Weight:
250 g
composition
composition
Membrane: 10.0% Brass, 90.0% Isobutylene Butyl Isoprene Rubber
Tips for storage and maintenance
Storage tips
Transport your inner tubes in a container that protects them against perforations (B'Twin transport container, original packaging, etc.).
Restrictions on use
Take care not to pinch the inner tube when mounting it on.
TESTS AND WARRANTY
Test product
To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.
Warranty
2 Years