QUECHUA
Men's waterproof hiking shoes - mh500 blue
We designed this waterproof shoe for those of you who hike regularly. Take to the mountain trails with your feet fully protected and comfortable
Hit that mountain trail with confidence in this waterproof hiking shoe. With cushioning, a leather upper that adapts to your foot, a stone guard, and grippy sole, you’ll stride along in comfort.
ID 8618759
BENEFITS
Anatomic design
The suede leather on the forefoot will adapt to your foot shape over time
Lightweight
445g per shoe in size 43
Abrasion resistance
Rubber stone guard at the front and plastic at the back of the foot
Traction
5mm studs shaped for strong traction. Rubber sole with very good grip
Cushioning
Thick EVA foam midsole: comfort/protection from the ground
Waterproof
Waterproof and breathable membrane lining: your feet dry for 6hr in all weather
Foot support
Weblock on the last 2 lace loops to hold the midfoot and heel in place
TECHNICAL INFORMATIONS
WHAT IS YOUR HIKING FREQUENCY AND INTENSITY?
We have classified our products in terms of performance and features for 3 levels of Mountain Walking:
- occasional: around ten hikes per year of about 3 to 4 hours’ duration, less than 10km and less than 700m of elevation gain.
- Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km, 700 to 1200m of elevation gain per outing.
- Intensive: more than 20 times a year. More than 6 hours, more than 20 km, 1200 to 2000m of elevation gain per outing.
Sole: OUTDOOR CONTACT
New high-performance sole with our new exclusive rubber blend developed by our experts. More grippy, more resistant. The sole is designed for better grip using 3D simulations and then laboratory tested to assess the coefficient of grip on different surfaces and conditions.
WATERPROOFING TEST
In a laboratory, the boot is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test we can determine a time and number of km that the boot can walk while staying dry.
Then we confirm in the field or under the rain, that the shoe meets its promises.
EXTENDING WATERPROOF PERFORMANCE
To keep your feet dry, we advise you to use a waterproof gaiter or mini-gaiter to protect the top of your boots and prevent water, pebbles and sand from getting in.
We advise re-waterproofing your boots twice a year using a re-waterproofing agent (search for ‘waterproofing’ on our Decathlon website) which will help you restore the original water-repellent qualities and help prevent stains on the outside.
PRODUCT DESIGN: OUR EXPERTISE
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.
WHICH SIZE SHOULD I SELECT?
Some Decathlon stores have a test route.
1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces, taking care to correctly balance the tightening.
3. Check two points:
- the heel does not come up before the boot when you walk uphill.
- the foot does not slide and the toes do not press against the front when going downhill.
4. Try on several sizes and models.
Break them in gradually to adapt them to your foot.
CONSEILS D'ACHAT / COMMENT ESSAYER VOS CHAUSSURES ?
Certains magasins Decathlon sont équipes d'un parcours test.
1. Essayez les deux chaussures, debout, avec les chaussettes utilisées pour la randonnée.
2. Serrez les lacets en prenant soin de bien repartir le serrage.
3. Vérifiez deux points :
- le talon ne décolle pas avant la chaussure quand vous marchez en montée.
- le pied ne glisse pas et les orteils ne butent pas à l'avant en descente.
4. Essayez plusieurs tailles et modèles.
Utilisez-les progressivement pour les faire à votre pied.
HOW DO YOU AVOID BLISTERS?
Blisters generally develop when the skin is weakened by friction. In order to prevent them from occurring, we recommend the following: - Choose a shoe in your size.
- Wear suitable socks
- Tie and tighten your shoes properly.
- Make sure you tighten or loosen your laces accordingly while wearing your shoes, especially before starting a climb or a descent.
- Wear your shoes on a short trip for the first use.
WHICH SOCKS ?
A waterproof shoe will be less breathable than a non-waterproof shoe. Mid-length socks like the MH500, MH520 and MH900 are therefore preferable for absorbing perspiration and reducing overheating.
OPTIMISE YOUR BOOT’S CAPACITIES: REPLACE YOUR INSOLES.
The original insole in your boots is designed to accommodate most feet. A change of insole can bring:
1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide heat and/or cushioning.
3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.
HOW SHOULD YOU LOOK AFTER YOUR BOOTS?
- Leave to air dry.
- Remove dry mud with a stiff brush.
- Clean marks using a brush and some warm water
- Leave to dry
- Spray with a re-waterproofing product to restore the water-resistance to the upper.
composition
composition
Upper of: 20.0% Polyamide, 40.0% Leather - Bovine - Split, 40.0% Polyester; Lining and sock of: 100.0% Polyester; Outer sole of: 60.0% Synthetic Rubber, 40.0% Ethylene Vinyl Acetate
Tips for storage and maintenance
Storage tips
Store in a well-ventilated dark, dry place.
Restrictions on use
Do not use as Personal Protective Equipment.
TESTS AND WARRANTY
Test product
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.
Warranty
2 Years
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
Product made from 2% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
MaterialRecycled polyester
Product made from 5% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
MaterialRecycled rubber
Product made from 10% recycled rubber
Using recycled rubber rather than conventional rubber reduces the CO2 emissions linked to the material by at least 26%.