Women’s surfing long sleeve 1-piece swimsuit - Dani black and white
Store Availability
As female surfers of all levels, we designed this swimsuit for advanced surfers surfing in all types of waves.
This women’s 1-piece swimsuit with long sleeves and a back zip stays firmly in place in large waves and is suitable for all water sports, and especially surfing.
BENEFITS
Sun protection
The fabric of this top has been tested up to UPF 50+
Resitant to impact of waves
Carefully designed to stay in place in waves of more than one metre
TECHNICAL INFORMATIONS
BODY SHAPE
We have created the Dani 1-piece for women wanting to surf waves of more than one metre without the risk of losing their swimsuit in the shore break or when duck diving under breaking waves. Ideal for surfing in warm water, its cut has been designed to limit chafing against the board and wax. Its feminine seams enhance the silhouette and do not crush the bust. Featuring a long back zip and a pull tab, it is easy to take on and off.
DRY SIZING AND WET SIZING
To ensure a perfect fit in the water, it is important to choose the right size while you are dry because once they are in the water, swimsuits become looser. We therefore recommend you buy the correct size. The swimsuit needs to fit snugly against your body in the fitting room, and you should feel supported. The elastane content in certain components used in the design of our swimsuits softens and relaxes in the water.
YOU ARE AN ADVANCED SURFER
You surf intensively, and it is your favourite sport. During your sessions, you paddle out to the line-up, duck-dive under the breaking waves if you are on a shortboard, or turtle-roll if you are on a longboard. You show dedication in powerful waves of more than one metre. Your swimsuit must stay in place for each of your movements, whatever the strength of the wave. We have designed a range for you that is suited to your intensive surfing and body shape.
ACTIVE AT THE BEACH!
Whether you be a surfer or enjoy bathing in the sea, you don’t want to lose your swimsuit! This is why we test all our swimsuits in the waves. Each model is designed for surfing and perfectly suits other watersports: stand-up paddle boarding, sailing, kite surfing, bathing, etc.
STAYS IN PLACE IN THE WAVES: THE TEST
We design swimsuits that promise to stay in place in the waves. To test them, we use a panel of female surfers with different body shapes who follow a test protocol in a pool at our design offices in Hendaye, south-west France. This protocol aims to reproduce the sensations experienced by surfers when being thrown around by a wave. If this test is conclusive, we go surfing in the sea to test our swimwear in real conditions.
FEEL GOOD IN OUR SWIMWEAR
Our work centres on helping women to feel good in our swimsuits. The bust is not flattened, the bottoms don't dig in, and the level of coverage varies. Our mission is to ensure that every woman can find a swimming costume that suits her body, whatever her shape or size.
DO YOU WANT TO EXCHANGE YOUR SWIMSUIT?
Is the size or style not suitable for you? would you like to exchange it at your Decathlon store? No problem, just be sure not to cut off the label of the swimsuit in case you want to exchange it.
composition
composition
Main fabric: 20.0% Elastane, 80.0% Polyamide; Yoke: 18.0% Elastane, 82.0% Polyester; Lining: 100.0% Polyester
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Restrictions on use
Not recommended for regular use in a chlorinated
TESTS AND WARRANTY
Test product
This product has been tested in use in Hendaye and has been subjected to numerous laboratory tests to guarantee the quality of use for which it was designed: tests on the fabric's stretch and stability, colour-fastness when subject to friction, washing, sea water, chlorinated water and exposure to light, and the product's overall performance after several washes.
Warranty
2 Years
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessGreige
Product made from 7% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 53% compared to conventional dyeing.
-
MaterialRecycled polyester
Product made from 23% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
Material
Recycled polyamide
Product made from 51% recycled polyamide
Using recycled polyamide rather than conventional polyamide reduces the CO2 emissions linked to the material by at least 38%.