DECATHLON
Bike Crank Extractor
Allows you to remove a crank, for example, to change your bottom bracket.
One tool for most of your cranks!Compatible with Shimano Octalink, ISIS Drive and square taper.
ID 8350528
BENEFITS
Compatibility
Shimano Octalink fluted and ISIS drive, square-taper cranks.
Easy assembly / dismantling
8 mm Hex bit to remove the bottom bracket spindle bolt.
Robustness
High-quality, heat-treated, machined steel part.
TECHNICAL INFORMATIONS
Features:
Length: 165 mm
Width: 44 mm
Thickness: 24 mm
Weight: 190 g
Material: Thermally hardened steel tool and plastic handle.
Compatibility:
Suitable for a standard adjustable wrench or a 17 mm wrench.
Compatible crank types (e.g. Square taper, Octalink, ISIS)
What is this tool for?
The crank extractor is used to remove cranks from bicycle.It allows for clean removal without damaging the thread.
Advice from our team:
On the bike, loosen and remove the crank bolt with the Allen key side of the tool.
Make sure that the crank thread is clean and fully threaded to avoid damaging the crank.
Then screw the extractor fully and firmly into the crank.It is important that the tool is screwed in correctly, otherwise the thread on the crank may be stripped during the next step.
Finally, screw in the push pin to remove the crank.
Warranty:
2 years
composition
composition
Metallic structure: 100.0% Steel; Handle: 100.0% Polyamide
TESTS AND WARRANTY
Warranty
2 Years