NABAIJI
Anti-fog re-activator for swimming goggles and swimming pool masks
Our design teams have developed this marker to reactivate the anti-fogging treatment on your goggles and to prolong their lifetime.
Is the anti-fog treatment on your goggles wearing out?
Thanks to the marker you can swim with fog-free goggles and keep your goggles for longer, effective for 1 to 2 hours between applications!
ID 8787185
BENEFITS
Anti-fogging
Fog-free goggles, each application guarantees 1-2hrs of swimming without fog.
TECHNICAL INFORMATIONS
HOW TO USE
1) Apply to your lenses (please note they must be completely dry)
2) Leave to dry for at least 1 minute
3) Immerse the goggles in water to spread the product
Re-apply on average every 1 to 3 sessions, depending on the speed at which fog reappears. 400 applications on average.
If your goggles fog up during the session, dip them in the water again, a protective film will reform and allow you to finish your session in good conditions.
PRECAUTIONS
DO NOT USE ON NEW GOGGLES, you may damage the new anti-fog treatment or scratch the lenses.
Never touch the inside of the lenses - Do not rub them.
If you rub your goggles before applying the product, the product may not work properly.
The goggles must be dry before applying the product
Replace the marker's cap after use
Do not use with contact lenses
Must not be used by kids
SAFETY
When used according to our recommendations for use, this product does not pose a risk to the health of users.
We have conducted tests through an independent laboratory followed by usage tests with a panel of swimmers to guarantee product compliance.
CAREFULLY READ THE INSTRUCTIONS BEFORE USING THE PRODUCT
COMPOSITION OF THE LIQUID
Water: 70-80%
Propylene glycol butyl ether: 1-10%
2-(2-butoxyethoxy) ethanol: 1-10%
Fluorocaliphatic oxyethylene: 1-10%
Potassium Hydroxide: 0-0.5%
Magnesium lauryl sulfate: 0 - 0,5%
composition
composition
Main part: ; Protection cover: ; Foam: ; Complementary parts:
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
After drying, put your goggles back into a case or pouch between sessions.<br /> Important: Never touch the inside of the lenses so as not to destroy the anti-fog coating.<br /> Replace cap after use
Restrictions on use
Does not work on diving masks
TESTS AND WARRANTY
Warranty
2 Years
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 20% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.