Women’s synthetic trekking padded jacket with hood, MT100 - Black
Trek comfortably in cold weather (down to -5°C when physically active) with this padded jacket with a hood that offers a combination of warmth and low weight.
Brace the cold in comfort with this padded jacket. Combining warmth and lightness, its technical design ensures a compact, slim fit, reducing unnecessary weight.
BENEFITS
Compact design
Easily folds away into its left-hand pocket using a zip with double puller
Water repellent
Surface-treated outer fabric to prevent water from getting in
Robustness
Outer fabric 100% polyamide 39 g/sqm. 20 denier
Warmth
Comfort from 5°C to -5°C.Wadding, good fill power (125g/m²). Jacket hem drawcord
Weight
This down jacket weighs approximately 330g in size M.
Pockets
2 zipped hand pockets
TECHNICAL INFORMATIONS
Thermal insulation - Warmth
This padded jacket has been certified for a comfort temperature of -5°C during a standardised test in a thermal chamber. The model is wearing a synthetic long-sleeved t-shirt and a light fleece underneath. It works with a simulated 5 km/h wind. In our heat comparison tool, it represents 2 stars.
Functions
- Inside flap under the zip that protects from the wind.
- Elasticised cuffs.
- Flap at the top of the collar to protect the chin.
- Tightening with an elastic cord and toggle at the hem.
- Hood with elasticated bias binding.
Technical information on the wadding
We use 100% polyester wadding weighing 125 g/sqm in the body section and 100 g/sqm in the sleeves and hood. The wadding is made from silicone-coated spiral fibres that make it highly compressible and highly durable. Despite its low thickness, it has high insulation properties thanks to the air trapped inside, and remains lightweight. It retains its warmth even when wet.
Durable materials
This polyamide canvas uses 20 denier threads (measurement unit of the thread) and resists up to 20,000 abrasion cycles. Durability is calculated using the Martindale test, Standard 12 947-2. This test is to rub the jacket’s material against another material to observe how the product resists wear.
Outer: 100% polyamide fabric 39g/sqm, 20 denier
Lining: 100% polyester fabric 35g/sqm, mix of 15 to 20 denier threads
Water repellent property of component (not to be confused with waterproofing)
The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This prevents the fabric from swelling, and keeps it lightweight and warm. The water repellent property is achieved by treating the fabric's exterior. This treatment must be renewed throughout the garment's lifespan (recommended after each wash). Water repellent treatment products are available in our stores.
How to restore water-repellent properties?
Once you have cleaned your padded jacket, we recommend you use a water-repellent reactivator spray to preserve the hydrophobic properties of the outer fabric. This renews the fabric’s water repellent properties and optimises performance throughout the lifespan of your garment. You will find it in stores and on our website by entering the code 8554908
A precious tip for maintaining your down jacket
In general, do not wash a down jacket too frequently because each wash decreases its thermal properties.
Does your down jacket have a snag? How to repair it
A tear on a padded jacket may happen when trekking. The good news is that it can be repaired! You can either mend it or apply a heat-bonded patch so that the tear doesn't get any bigger and the synthetic fibres escape. Don't you feel at ease carrying out this repair yourself? Don't worry! Our in-store Decathlon workshops offer a repair service for your padded jackets.
composition
composition
Main fabric: 100.0% Polyamide; Main lining: 100.0% Polyamide; Filling: 100.0% Polyester
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
TESTS AND WARRANTY
Test product
In November 2017, 6 trekkers (4 men and 2 women) with part of the Forclaz design team tested this padded jacket for four days in the Southern French Alps. We were then able to make the final modifications and validate it for use for mountain trekking.
Warranty
2 Years
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
Product made from 22% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
MaterialRecycled polyester
Product made from 43% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessGreige
Product made from 7% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 53% compared to conventional dyeing.