TRIBORD
Unisex Sailing ANKLE BOOT 4 mm neoprene
Our Tribord design team have developed this neoprene for your dinghy or catamaran sailing trips.
This neoprene boat ankle boot is specially designed for sailing with a soft upper, reinforced instep and a sole designed for a firm grip on smooth and wet surfaces.
ID 8574197
BENEFITS
Easy dressing
Optimal zip length to make it easier to get the ankle boots on and off.
Warmth
4 mm neoprene with glued and blind-stitched seams to limit water entry.
Grip
Rubber sole for excellent grip.
TECHNICAL INFORMATIONS
THERMAL INSULATION WITH NEOPRENE
By trapping a thin layer of water around the feet, the neoprene boot works in two ways:
1. the trapped water inside the boot gradually warms up
2. heat transfer from the body decreases.
The boot and the thin covering of water form a layer of insulation.
Neoprene is a closed-cell elastomeric foam with trapped nitrogen bubbles that have insulating properties
DESCRIPTION OF THE ANKLE BOOT
The upper of the Tribord neoprene sailing ankle boots are made of 100% neoprene (thickness: 4 mm) to ensure optimal thermal insulation.
The uniquely designed rubber sole provides excellent grip on smooth, wet surfaces, without marking the deck of the boat.
The fastening benefits from a YKK® zipper, and an extendible neoprene pleat, which makes it easier to get them on.
The rubber reinforcements at the instep ensure good support under the toe strap.
CHOOSE THE RIGHT SIZE
This ankle boot is a great choice for women, children, and men alike.
The ankle boot sizes on the large side. If you’re between 2 sizes, we’d recommend opting for the smaller size.
MULTI-SPORTS
The boot was designed with the restrictions of leisurely sailing in mind. Our design choices make it suitable for other sports such as SUP (Stand-up paddleboarding), windsurfing, sea wading or even canoeing/kayaking.
composition
composition
Upper of: 10.0% Polyester, 90.0% Rubber; Outer sole of: 100.0% Latex Rubber; Lining and sock of: 100.0% Polyester
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
In a dry, well-ventilated place. Avoid heat sources. To extend the lifespan of the ankle boots, do not leave them out to dry in direct sunlight. Machine washing is not recommended.
TESTS AND WARRANTY
Test product
Developed and tested by our design teams in Hendaye, France. The components used for this product are laboratory-tested to ensure the best possible quality and durability.
Warranty
2 Years
Agree by
Our Arradon (47 Nautik) sailing club ambassadors and the M Power team (49ers).