DECATHLON
650x28-42 Bike Inner Tube - Presta
This inner tube is suitable for 650 diameter, 28 to 42 section tyres with a 48mm Presta valve.
650x28 / 42 Presta inner tubes with 650 diameter and a cross-section ranging from 28 to 42mm.
ID 8549087
BENEFITS
Compatibility
650x28 to 650x42 tyres and wheels with a 28 to 42 section.ETRTO 28/42 - 571
Waterproof
Optimised composition to ensure your inner tube has a good seal.
TECHNICAL INFORMATIONS
How to choose an inner tube
Check all the information indicated on the sidewall of the tyre (diameter and width). For example, 26 x 2.20 means a tyre with a 26-inch diameter and 2.2 inches wide.
On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example, 50-559 means a tyre that is 50mm wide and has an inner diameter of 559mm (approx. 26 x 2.00).
Removing an inner tube
Remove the old inner tube using B'Twin tyre levers
Checks to carry out before installing an inner tube
Check the condition of your tyre and replace it if necessary.
Make sure no objects are lodged in the tyre.
Check the condition of your tyre rim strip.
A rim strip that is even slightly bent can cause punctures.
Check that your rim does not have any other issues that could damage your inner tube.
Mounting the inner tube
Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Insert the valve, making sure you are using the correct valve for your rim.
Put the inner tube entirely inside the tyre so that it fits inside the rim.
Take care not to pinch the inner tube when fitting.
Mounting the tyre
Start mounting the tyre at the valve.
Finish mounting the tyre opposite the valve to avoid pinching the inner tube.
Never mount your tyre with a tool or a tyre lever, as you risk pinching and puncturing the inner tube.
Inflating the tyre
Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI).
Regularly check that your tyre is in the correct position as you inflate it.
Tip from the pros
To avoid punctures from pinching and for the best tyre performance, we recommend that you check your tyres and, if necessary, inflate them to the suggested pressure before every ride.
Weight
165g
composition
composition
Main part: 100.0% Synthetic Rubber; Cover: 100.0% Polypropylene; Valve: 100.0% Brass
Tips for storage and maintenance
Storage tips
Carry your inner tubes in a container to protect them from getting punctured (B'Twin carry case, original packaging, etc.).
Restrictions on use
Take care not to pinch the inner tube when mounting it on.
TESTS AND WARRANTY
Test product
To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.
Warranty
2 Years