Kids progressive pool armbands - Tiswim print savanna beige
The TISWIM progressive swimming pool armbands-waistband is designed to be used by kids (15-30 kg) when discovering the water.
1 product, 3 possibilities! With an ultra-compact design, the armbands-waistband helps kids in the various stages of learning to swim, from vertical to horizontal positioning.
BENEFITS
Compact design
When deflated, the TISWIM armbands-belt can be easily slipped into your bag
Modularity
The 3 ways of using them adapt to the kid’s level of comfort in the water
Buoyancy aid
Certified standard EN 13138-1 reinforced buoyancy at 70 Newtons complete product
TECHNICAL INFORMATIONS
Learning to swim encourages the psycho-motor development of young kids.
DECATHLON offers 3 Learning to Swim experiences: Discovering the water, Discovering swimming and Discovering underwater. Appropriate products are offered for each experience.
The TISWIM 2 adaptive armbands-belt is part of the “Discovering Water” experience.
Its adaptability makes it possible to support the kid through their water discovery with a buoyancy level that reduces in accordance with their progress and helps them to discover different positions in the water.
Why use adaptable armbands?
Given the fact that it’s often difficult to find the correct flotation aid for your kids and to anticipate how well they take to the water and their confidence, we designed the Tiswim 2. With its modular design, this progressive armband lets kids discover the pleasure of playing in the water, moving around and learning their first swimming movements in complete safety.
What are the 3 ways of using the Tiswim?
Step 1/Initially, the Tiswim is used with all the parts (armbands + belt in front)
Step 2/Armbands only, to start moving in the water in a vertical position
Step 3/Belt only positioned at the back to discover the swimmer’s position (horizontal) and the first movements of swimming.
Secure fastening system
The adjustment strap on the front chamber is equipped with a 3-point buckle to prevent the child from removing it themselves.
The buckle requires at least two simultaneous or sequential actions to prevent unintended opening.
How does the valve work?
The TISWIM progressive armbands-waistband have PVC one-way inflation valves.
To inflate the product correctly, press the base of the valve to open it.
The valve closes mechanically in about 2 seconds. As such, it is normal for a bit of air to escape after inflation. This is why you must close the cap quickly.
How much should I inflate the different parts of the Tiswim?
The armbands are always inflated to the maximum. However, you should ideally inflate the second chamber directly on your kid’s arm.
It’s best to inflate the belt before putting it on your child, when it’s going to be used in a front or back position.
How can I adjust the belt in the front position?
When the product is optimally used. Inflate the front chamber, and position it on your child’s chest. Tighten the strap on the back, as you usually would. When in use, make sure that the front chamber doesn’t rise up to your child’s chin, to avoid it rubbing. If needed, don’t hesitate to reposition the product on your child’s torso.
Recommendation to avoid premature discolouration
After use, rinse your product and do not leave it in direct sunlight.
composition
composition
Main fabric: 100.0% Polyvinyl Chloride; Buckles: 100.0% Polyoxymethylene; Webbing: 100.0% Polyester; Side seam fabric: 100.0% Polyester; Elastic: 8.0% Elastane, 92.0% Polyester
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Rinse with clean water, allow to air dry and store away from sunlight in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
This product has been tested in use in Hendaye and has been subjected to numerous laboratory tests to guarantee the quality of use for which it was designed.
Warranty
2 Years
Agree by
The Tiswim progressive armbands-waistband complies with buoyancy aid standard EN 13138-1 for learning to swim. Its buoyancy volume significantly exceeds the standard requirements (70.1 newtons when the product is complete, 42.6 Newtons for the armbands alone with a standard requirement of 25 N, and 27.5 Newtons for the belt alone, with a standard requirement of 15 N)
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 50% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.