0.5 L stainless steel insulated flask 900 with quick-release cap for hiking
Store Availability
Need to keep your drinks hot or cold for several hours? Our designers have developed this light, hard-wearing and insulated stainless steel flask.
Keep your drinks at the right temperature using our insulating 0.5-litre stainless steel flask. Lightweight and hard-wearing, it comes with a lockable quick-open top and an in-built filter.
BENEFITS
Easy maintenance
Easy to clean thanks to the screw top. Stainless steel internal wall.
Ease of use
Quick opening with one hand, top can be locked with the handle. S/steel 270 g.
Robustness
Double stainless steel int. wall con.18/8 (304) with an air gap between the two.
Isothermal
Keeps drinks warm for 14 hours | Complies with Standard ISO12546-1
Repair
Quick opening 500 cap available separately (reference 8575855).
TECHNICAL INFORMATIONS
How is thermal insulation tested?
We’ve tested this flask in the lab according to Standard EN 12546-1, at an ambient temperature of 20°C while filled to capacity. The time it takes to drop from 95°C to 50°C (drinks temperature considered warm enough to drink) is 14 hours.
The secret of the insulated flask?
This insulated flask’s stainless steel double wall with vacuum blocks heat by conduction and convection.A thin layer of copper reduces thermal exchanges by radiation.
A few tips to improve thermal insulation: fill your flask with warm water for 5 minutes and then replace the water with your hot liquids, then close. The fuller the bottle, the better the heat retention.
Warning: the flask is very insulating, so liquids will remain hot for a long time.
Functions
The top is easy to open with one hand by pressing on the white button marked "PRESS". When carrying the flask, you can lock this button by sliding the white button down. A red area appears, indicating that the top is locked and it can no longer be pressed.
The top has an integrated filter to keep large tea leaves or infused fruits out of your cup. Not suitable for very fine cut teas.
Care tips
Dishwasher safe (top + body) Be careful not to lose the top seals. Dry with the top off. The top's seal can be removed for a complete wash and dry.
First use
Rinse the entire product 3 times with clear water before using for the first time.
Materials and regulations
Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.
We have chosen to use 18/8 (304) stainless steel for the flask's body, recognised for its food safety and for the top, a heat and shock resistant polypropylene.
Weight and dimensions
Volume: 0.5 litre
Dimensions : Ø 7.2 cm x 23 cm
Weight: 270 grammes (body 221 grammes and cap 46 grammes
Available in 0.5 L / 0.8 L / 1 L
Don't throw away, repair
Our products will join you on your mountain walks.
As you gradually progress, they will age, certain parts can get worn, broken or lost.
To help repair your flasks, our tops are available separately.
Product design: our expertise
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.
composition
composition
Bottle body: 100.0% Stainless Steel; Lid: 81.0% Polypropylene, 8.0% Silicone, 10.0% Polyamide, 1.0% Stainless Steel
Tips for storage and maintenance
Storage tips
Wash and dry before storing away. Store in a clean, dry place.
Restrictions on use
Do not put in a microwave oven or freezer.
TESTS AND WARRANTY
Test product
This isothermal product is tested according to the following protocol: Water at 95°C is placed in the product, which is closed and placed in an oven at 20°C. The drop in temperature of the water is then measured after 6 hours and reached 67°C. 52°C after 12 hours, 36°C after 24 hours.
Warranty
5 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.