| Your comfort above all |
To take full advantage of a hike, we devote particular attention to designing comfortable products.
The back, shoulder straps and handle are comfortable because of their thickness and structure composed of different types of foam padding covered with a 3D mesh to improve ventilation and drying.
Back: 2 pads with 2 types of foam (PE - PU), 18 to 28 mm thick.
Shoulder straps: 2 types of foam (EVA - PU), 18 to 21 mm thick. |
| Flexibility and practical features |
This 3-in-1 bag adapts to your adventures and can be used in different ways:
- Photo backpack: the compartment for your photo equipment is built into the bag
- Backpack: the photo compartment can be removed to make the most of all the inside space. A removable middle divider makes organising easier.
- Photo compartment: can be used alone thanks to its padded structure and 2 carry handles |
| Access your contents |
2 options to access your contents:
- once on the floor, the side on the ground by opening the entire back
- when carrying it, simply open the side access to quickly and easily grab your camera |
| Volume & capacity |
Main inside volume of the bag (without the photo compartment): 30 litres.
Photo compartment inside volume: 10 litres;
It’s easy to organise thanks to the multiple rip-tab dividers and can hold:
- 1 Reflex camera with mounted lens
- 4 additional lenses/flashes
- Accessories and personal effects
Compact tripod stand and blanket holder on the outside of the bag that can be attached using the side and lower straps. |
| Dimensions |
Backpack outer dimensions: 50 x 28 x 23 cm / This bag can be used as cabin baggage, contact your airline;
Photo compartment dimensions: Outer: 28 x 28 x 16 cm / inside: 26 x 26 x 14 cm / Wall thickness: 10mm;
15" laptop sleeve / water bladder dimensions: 36 x 27 x 3 cm;
Tablet pocket dimensions: 27 x 27 x 2 cm;
Stretch pocket for 6.8" phone dimensions: 7 x 16 cm. |
| Photo equipment protection |
The photo compartment is structured with 10 mm thick foam panels.
The inner fabric is soft.
To avoid any contact between the different equipment:
- correctly position the separators using the rip-tabs so that each part is properly wedged and protected
- divide accessories into the different pockets |
| Seal |
The components of the bag are water-repellent so you can walk for a short while in light rain. To continue your hiking in rainy weather and protect all your belongings, it comes with a protective rain cover (stored in the bag's bottom pocket). |
| How to adjust your backpack? |
Once the bag is loaded:
1 - Loosen all the straps, shoulder straps, stomach and chest straps
2 - Put the bag on
3 - Buckle the waist strap and adjust it
4 - Buckle the chest strap, adjust the height and width
5 - Tighten the shoulder straps (top to bottom)
6 - Adjust as needed
It’s fitted! |
| How to fill your backpack? |
Put your heavy items at the bottom. Pack your clothes on top. Keep your waterproof jacket and/or fleece within arm’s reach. Place small items for daily use (sun cream, map, glasses, etc.) in the pockets. The water bladder will be placed in the compartment provided along the back, and the water bottle in the outer pocket provided for this purpose. |
| How is volume measured? |
The volume of each backpack is measured using a standard method: we fill the main compartment, as well as each pocket, with little balls. Then we empty these balls into a graduated container, which gives the equivalent volume in litres. |
| 10-year guarantee |
At Decathlon, all of our Quechua backpacks are guaranteed for 10 years against normal product wear and tear. In the case of a defect, we can offer you its repair, replacement, or a refund. The guarantee covers the components from the zip to the seams: more information can be found on the support section of the Decathlon website. |
